Many years ago, Guangli, a leading paint booth manufacturer in China, introduced an economy line of paint booths, called the GL Series. Because many inquiries from customers about an economy booth, our factory decided to do some research and discovered there was a market for these models. Compared to what was currently available, he knew right away that any Guangli economy paint booth would be much higher quality in performance and construction.

If you are new to economy paint booths or are looking to learn more specifically about the GL Series, check out our Website: https://www.gzguangli.com/spray-booth_c2

Contact us: sunnie@gzguangli.com.cn

Tel&WhatsApp: 008613925061383

New design CE standard spray booth for passenger cars is the latest development from Guangli aimed at the most demanding spray booth operator. It has been developed to provide exceptional results along with higher productivity & spray booth size. Equipped with the optional good use system, this model provides exceptional performance in terms of energy saving, increased productivity, and environmental impact.

If you need to extend the height, we can do it! Commercial vehicles are growing in the form of cargo size vans, utility box trucks, e-commerce delivery vehicles. There’s larger SUV’s and crossovers; extended dually pick-ups and larger trucks overall. The decision to install an extended height, width and length spray booth broadens our customer’s capabilities to service those vehicles, which ultimately increases their business.

Welcome all over the world customers to visit our spray booth supplier, we will follow and assist the whole journey of your investigation and visit to factories.

https://www.gzguangli.com/

sunnie@gzguangli.com.cn

WhatsApp: 008613925061383

Guangli’s Commercial Vehicle spray booth is a type of spray booth that comes with an extensive range of cutting-edge features to guarantee a consistently brilliant colour finish and rendition, which substantially reduces cycle times and huge savings in energy output and maintenance costs. The equipment of this paint spraying/baking booth is composed of booth structure system, illumination System, air supply system, circulation system, air purification system, paint mist treatment system, pressure control devices, and electrical control system, etc.

As the application of sheet metal becomes more and more widespread, the design of sheet metal parts has become an important part of product development. Mechanical engineers are proficient in the design skills of sheet metal parts, and the process flow of sheet metal spraying is also important, especially in the automotive industry painting line. So we design a line to solve all the processes at short time--our spray painting line as below. Automotive sheet metal spraying process: scraping putty, polishing, painting, baking etc. Much more save time and prove productivity.

Call us for more details: 008613925061383

Official Website: https://www.gzguangli.com/

Official Email: sunnie@gzguangli.com.cn

Using an automotive car spray booth to help you paint your car more efficiently and safely. How a paint booth can help you achieve a smoother and cleaner coating, abide by regulations regarding dangerous chemicals involved in paint spraying, reduce costs required to operate it.

Spray paint booth is a large, contained environment equipped with exhaust fans and filters to make commercial spray painting safer and cleaner. You can choose standard spray booth or water-based spray booth for good paint condition. A paint booth can offer the most professional-grade paint jobs possible. If you can’t risk subpar coverage, then a paint booth is the way to go.

Our factory has a good technical team to design the spray booth to fit your needs. For every piece of equipment from us, our team is ready to help with everything from design and installation and service. Clients from a wide variety of industries trust Guangli spray booth to bring safe and efficient paint booths to their manufacturing processes.

Click here to follow more informations: https://www.gzguangli.com/

Email: sunnie@gzguangli.com.cn

WhatsApp: 008613925061383

The spray booth is a closed place that allows the ventilation of hot air which can speed up the painting and drying process.

In it, several phases intervene so that the above can be achieved. For example, during the application of paint, the cabin must have filters that allow the removal of any dust particle so that it does not spoil the process.

For this reason, it is necessary that elements such as the air heater and the fans are in good condition.

· An air heater can generate this contrast between temperatures, because once the car has been painted, the environment must allow the "curing" or hardening of the paint to be faster.

· Fans can filter the retention of particles that could, in the future, damage the finish.

Investing in the Paint Baking Booth is a wise choice for any business or individual looking to achieve excellence in their paint jobs. So, why wait? Get your hands on this amazing equipment today and take your painting experience to a whole new level!

sunnie@gzguangli.com.cn

https://www.gzguangli.com/

WhatsApp: 008613925061383

Paint booths are essential equipment for any industrial refinishing or automotive paint shop. It's a necessary investment. It provides a controlled environment for spraying paint and other coatings, helping to ensure a high-quality finish. Paint booths also help protect the painter from harmful fumes and paint mist.

We essential introduction to the Downdraft Paint Booth

A downdraft spray booth is a fully enclosed spray booth with airflow straight down design, which many experts agree creates good environment for high-quality finish work. Spray paint booths are usually large enough to accommodate vehicles and other big items.

This type of booth is extremely effective at managing contaminants and overspray. Because the exhaust system requires grids basement in the floor.

Get Your Custom Quote in 24 Hours: +8613925061383

Or send email to us: sunnie@gzguangli.com.cn

Or check our website and leave messages to us: https://www.gzguangli.com/

MOUNTING-INSTRUCTIONS

Proper brake wheel cylinder replacement is essential for optimal performance and safety. For safety reasons and in order to achieve an optimal effect KOMP recommends to have all maintenance and repair work carried out by trained specialists and in compliance with the guidelines of the vehicle manufacturer.

While working on the brake system do not operate the brake pedal or the hand brake (damage to the brake system).
Draw the brake fluid out of the compensation tank.
Attention: Brake fluid has lacquer dissolving properties, do not consume and avoid contact with eyes and skin.
DISASSEMBLY:
• Jack the vehicle up, support and secure it against dropping down (1).
• Remove the wheels.
• Loosen the hand brake cable.
• Back off the brake shoe adjustment device.
• Now the drum can be pulled off by turning it slightly.

• Clamp off the brake hose with hose clamp (2).

• Remove the brake shoes using the appropriate special tools.
• Unhook the hand brake cable.
• Unscrew the brake line from the wheel cylinder and remove the factory wholesale brake wheel cylinder.
• Use brake cleaning agent, do not use compressed air to remove the brake dust. Any kind of inhaled dust is harmful to health.
• Clean brake drum and hub, remove the rust ring (3).

ASSEMBLY:
• Install the new wheel brake cylinder, tighten the brake line with the torque specified by the manufacturer.
• Cover the contact area of the brake shoes on the anchor plate slightly with the grease (4).
• Fit the handbrake cable in the handbrake lever.
• Install and fix the brake shoes. Depending on the brake system place the adjuster in the initial position and adjust accordingly.
• Assemble the OEM wholesale brake wheel cylinder.
• Depending on the type of drum clean the wheel bearing and assemble it with fresh grease. Renew radial seal, cotter pin and locking nuts. Follow the guidelines of the vehicle manufacturer (5).
• Remove the hose clamp.
• Adjust the brake and operate the foot brake several times with power to enable the automatic adjustment system to adjust.
• Vent the brake system as specified by the vehicle manufacturer.
• Adjust the brake and hand brake.

• Assemble the wheels.
• Tighten the wheel bolts with a torque wrench as specified by the vehicle manufacturer (6).
• Check the brake fluid level, fill up if necessary. Follow the operating instructions (7).
• Check the brake system for leaks.

• Check the brakes on the brake test bench, perform a test drive (8).

The above is the installation instructions of the brake wheel cylinder. If you need to add or want to consult more information, please leave us a message. Of course, if you want to buy the factory price brake wheel cylinder, we can also provide it for you.

1. Production method：

To produce a cast rim, molten metal is poured into molds and allowed to cool down, after which the blanks are processed on various machines — machined, holes are made, constructive bends, protrusions, ledges, etc. are added. The final stage may be the application of paint and varnish coating.

Casting wheels does not require expensive and bulky equipment, is carried out in several steps, does not take much time. These factors affect the cost of production, products are many times more expensive than forged analogs. But there are also disadvantages. The most serious of them is a granular structure with an abundance of airmicro-bubbles, which reduces the strength of the rim. Parts are subject to the formation of cracks, deformations. To compensate for this disadvantage, manufacturers are forced to increase the thickness of the product, and this, in turn, leads to an increase in weight and load on the chassis.

An alternative is alumina alloy forged wheels, although the name does not quite correctly reflect the process of their manufacture. It is rather not forging, but hot stamping in a closed mold. Molten metal is first poured into cylindrical molds, obtaining a kind of columns. They are allowed to cool and sawed into washers. Then the blanks are heated and sent under a hydraulic press, where the washers are turned into flat wheels. With the help of various nozzles, the wheels are given the desired shape, most resembling a pot with a rim. Due to repeated exposure to the metal structure and its stretching, graininess is replaced by fibrousness, and the powerful pressure provides a denser and stronger texture, without excess air.

As a result,T6061-T6 forged wheels are able to withstand increased loads. The resulting blanks are sent to a milling machine, where they are given a specified design, mounting holes, stiffening ribs, etc.

2. Weight. Forged wheels are available from 15” to 36”, and all much lighter than cast wheels, as the metal becomes denser and stronger during the production process, and there is no need to thicken the walls of the rim. In addition, stamping makes it possible to obtain a thinner profile of products than with casting. Two wheels with the same size can have a difference in weight of 3-4 kg.

3. Cost. Hot stamping of wheels requires the installation of a special production line, a powerful hydraulic press, expensive processing machines with program control. The process itself is considered very resource-intensive, including time, which affects the price:custom forged wheels are almost twice as expensive as cast wheels.

When driving, car wheels, especially high-performance forged wheels, inevitably encounter diverse road conditions, leading to occasional scratches. Faced with these marks on their car wheels, many owners find themselves torn between ignoring them and rushing to get them repaired.

Foremost, scratches on car wheels not only detract from their aesthetics but could potentially compromise driving safety. While minor scratches may merely mar the surface, deeper ones could damage the internal structure of therim, weakening its strength and heightening driving risks. Therefore, for pronounced scars or deformations, a prompt visit to a professional repair shop for inspection and restoration is highly recommended.

However, for superficial scratches, if the owner is not particularly meticulous about appearance and confirms that therim's strength remains unaffected, opting for temporary non-repair is an option. Nonetheless, it's crucial to acknowledge that these scratches could deteriorate over time, potentially leading to rust.

In summary, the decision to repair car wheel scratches hinges on the scar severity and the owner's personal preferences, with special consideration given to forged wheels due to their performance attributes. To ensure driving safety, owners should make a preliminary assessment upon discovering wheel scratches and seek professional maintenance assistance when necessary. After all, the integrity of the wheelrim, particularly in high-performance forged wheels, is directly tied to driving stability and safety.

Mainly because of the below advantages of the aluminum alloy forged wheels:

1) Unique design.

Forged wheels are produced both according to existing templates and individual designs from the customers. You can add originality to the discs with the help of color painting (the constantly updated color range offers great opportunities in this regard), laser or mechanical engraving

2) High safety margin.

3) Low weight.

The low weight provides a smooth ride, lower fuel consumption and fast speed gain. Forged wheels have proven themselves in off-road and adverse weather conditions,

Forging weighs almost half as much as stamped steel wheels, and a third less than cast wheels. This leads to reduced load on the chassis.

4) Resistance to corrosion and the effects of road reagents.

5) Plasticity. The fiber structure improves the flexibility of the metal, so in a strong blow the rim is more likely to bend than crack.

6) Easy to install: If you want something original and reliable, forged products have the advantage. Only it is better to put them on cars with reinforced suspension.

7) Inexpensive to repair. Small deformations that may occur during use or in a traffic accident are eliminated by rolling on the machine, which are available at most service stations.

Kinder reminder:

When choosing unique forged wheels, it is imperative to take into account the seating diameter, rim width, size and configuration of mounting holes, rim outreach (affects the width of the track), maximum load.

FYI, custom forged wheels can be made in different size from 15” to 32”, even bigger.

Wish the above information is helpful to the lovers of forged wheels.